Talento Fully Fitted Towbars

The vast majority of towbars are fitted to predefined positions on the chassis of the vehicle when built at the factory by the vehicle manufacturer.

In some, but not all, cases it is necessary for the rear bumper/trim to be cut in order for the towbar to be fitted correctly. This is determined by your vehicle type and not by the make of the towbar or the installer who is fitting your towbar. In other words you can’t avoid a cut if your vehicle requires one for the towbar type that you have chosen.

Bumper cuts can either be invisible which is when the cut is underneath the vehicle or visible which is where the cut can also include part of the area to the rear of your vehicle that can be seen. Rest assured that if your bumper requires cutting that it will be done professionally by your installer as part of the installation.

Due to the shear volume of vehicle makes, models, variants and ages coupled with the numerous towbar types it is impossible for us to show the bumper cut information as 100% accurate for every vehicle/towbar combination.

If the result above shows “Expected” data then in most, but not all, cases this will be the likely conclusion and your LocalPRO installer will be able to confirm the details once your order has been placed.